INTRACOM          

jetSpeed 420+ ADSL2+ Router

Ethernet Interface Broadband ADSL Router


Specifications

Hardware

  • Local Interface
  • One 10/100BaseT Ethernet port, IEEE 802.3, RJ-45 connector
  • WAN ADSL Line Interface
  • Multi-Mode ADSL Standard
  • RADSL (DMT T1.413 Issue 2)
  • G.dmt (ITU G.992.1)
  • G.lite (ITU G.992.2)
  • G.hs (ITU G.994.1)
  • Auto-negotiating rate adaptation
  • Supports Dying Gasp (Optional)
  • Connector: RJ-11
  • Indicators
  • LAN: Green LED: ON when Ethernet port is active, Blinking when Ethernet transmitting.
  • USB: Green LED: ON when USB port is active, Blinking when USB transmitting.
  • POWER: On while the power supply is properly connected.
  • WAN: Green LED: ON when ADSL link is ready, Blinking when ADSL is training.
  • ALM: Red LED: ON when booting up, Blinking when error, Continuous ON indicates internal error.
  • OAM&P
  • Remote: Telnet or Web browser
  • Environment
  • Operation Temperature: 0 ° C ~ 50 ° C
  • Operation Humidity: 5% ~ 95%
  • Storage Temperature: -20 ~ +85 ° C
  • Storage Humidity: 5%~95%
  • Power
  • AC Adapter :Input 120 VAC/60Hz or 230VAC/50Hz; Output 15VAC 1A
  • Power Consumption: Less than 5 Watts
  • Physical Dimensions
  • (W x D x H) 180mm x 143mm x 42mm
  • Certificates
  • CE, CB, FCC Part 15 Class B, UL

Software

  • ATM
  • ATM Cell over ADSL, AAL5
  • Support UBR, CBR & VBR-nrt
  • VPI Range (0-255) and VCI range (1-65535)
  • Supports up to 8 PVCs
  • Supports OAM F4/F5, and loopback cells
  • Payload Encapsulation --
  • RFC2684 (RFC1483), multi-protocol over ATM
  • RFC2364, PPP over ATM (CHAP and PAP supported)
  • RFC2516, PPPoE (PPP over Ethernet) over ATM
  • Bridging
  • Transparent Bridging (IEEE 802.1D)
  • RFC2684 (RFC1483) Bridged
  • Spanning Tree Protocol (IEEE 802.1D)
  • Bridge Filtering
  • Routing
  • IP Address Forwarding
  • MAC Encapsulated Routing
  • Routing Information Protocol (RIP) v1, v2
  • DHCP client (to the DSL network)
  • DHCP relay agent
  • NAT/PAT - RFC1631 (basic Firewall support)
  • Support Point-to-Point Protocol (PPP)
  • PAP for user authentication
  • RFC2684 (RFC1483) Routed
  • DNS relay
  • UPnP
  • IGMP-Proxy
  • IP QoS/Diffserv
  • Configuration and Network Management
  • DHCP server for IP management
  • HTTP for configuration and firmware upgrade
  • Web configuration
  • Telnet (Server)
  • TFTP (Client)
  • FTP (Client) using WGET in Linux
  • DMZ
  • Firewall
  • NAT ALGs
  • IPSEC pass-through
  • Ping of Death
  • SYN Flood LAND
  • Protection against IP and MAC address spoofing
  • Packet Filtering
  • Stateful Packet Inspection (SPI)
  • UPnP NAT Traversal

Specifications are subject to change without previous notice.