jetSpeed IAD-WP3 Broadband Wireless IAD

ADSL2+ 802.11g Wireless VoIP IAD

Specifications

Hardware

• Local Interface
• Four 10/100 Base-T Ethernet ports in RJ-45 connector, comply with IEEE 802.3u
• Integrated 802.11g WLAN Access Point with external antenna, backward compatible with 802.11b

• WAN Interface
• 2-wire loop with 100 ohms line impedance in RJ-11 connector
• Complies with ITU-T G.dmt (G.992.1), G.lite (G.992.2) and ANSI T1.413 issue 2
• Complies with ITU-T ADSL2 (G.992.3) and ADSL2+ (G.992.5)

• Analog Voice Interface
• 2 * FXS ports with RJ-11 connectors for analog phone set connection
• 1 * FXO port with RJ-11 connector for PSTN / PABX connection

• Indicators
  Front panel (all LEDs in green color)
• PWR - ON when the power supply is properly connected.
• WAN - Blinking while ADSL is training, and ON when ADSL link is ready.
• LAN - Blinking while Ethernet is transmitting data, and ON when Ethernet port is active.
• WLAN - Blinking while WLAN is transmitting data, and ON when WLAN port is active.
• VRY - ON when VoIP function is ready.
  Rear panel
• Each Ethernet port has its own speed (10/100) and activity indicators.

• OAM&P
• Through Web browser, remotely or locally
• One hidden console port (RS-232) for maintenance

• Environment
• Operation Temperature: 0 ° C ~ 45 ° C
• Operation Humidity: 5% ~ 95% (non-condensing)
• Storage Temperature: -20 ° C ~ +85 ° C
• Storage Humidity: 5% ~ 95% (non-condensing)

• Power
• AC adapter :Input 120 VAC/60Hz or 230VAC/50Hz; Output 15VAC 1A
• Power consumption: Less than 15 watts

• Physical Dimensions
• (W / D / H) 220 mm / 169 mm / 42 mm

• Certificates
• CE, CB (TBD)

Software

• ATM
• ATM cell over ADSL, AAL5
• Support OAM F4 / F5 and loopback cells
• Support UBR, CBR and VBR traffic classes
• Support VPI range 0-255, VCI range 1-65535 and up to 8 PVCs under bridge mode
• Auto VPI/VCI detection per DSL forum TR-068
• Payload Encapsulation:
  - RFC2684 / RFC1483, Multiprotocol Encapsulation over ATM Adaptation Layer 5
  - RFC2225 / RFC1577, Classical IP and ARP over ATM (IPoA)
  - RFC2364, PPP over AAL5 (PPPoA)

• Bridging
• RFC2684 / RFC1483 bridged PDU encapsulation
• Transparent bridging (IEEE 802.1D) with at least 32 MAC addresses
• Bridge filtering with per-port extensions

• Routing
• RFC2684 / RFC1483 bridged and routed PDU encapsulations
• MAC Encapsulated Routing (MER)
• Support Point-to-Point Protocol (including PPPoA and PPPoE) and user authentication via PAP, CHAP or MS-CHAP
• Routing Information Protocol (RIP) v1 and v2, static route
• DHCP client, server and relay agent
• NAT / PAT - RFC1631 with support for extensive ALGs
• DNS relay
• IP multicasting, IGMP and IGMP-Proxy

• Firewall
• NAT: 16 sessions, DMZ and ALGs
• Stateful Packet Inspection (SPI) with DOS protection - Ping of Death, SYN Flood LAND
• Protection against IP and MAC address spoofing
• UPnP NAT traversal and VPN / IPSec pass-through

• Wireless
• Supported cipher suits: TKIP; WEP with 64, 128 or 256 bits key length; Wi-Fi WPA
• Supports up to 8 WPA STAs in BSS mode
• Authentication protocols: Pre-shared Session Key (PSK), 802.1x / RADIUS
• Multiple / Hidden SSID
• Allow / Deny wireless MAC address list

• Voice
• FXO for failsafe lifeline
• Supports voice CODECs like G.711 (A– / μ–law), G.726 and optional G.729A/B or G.723.1
• G.168 line echo cancellation with programmable tail
• Adaptive jitter buffer, packet loss concealment (PLC), voice activity detection (VAD), comfort noise generation (CNG) and Caller ID
• DTMF tone detection and generation; Fax / Modem detection and pass-through

• VoIP and Telephony Bonus Services
• Supports SIP (RFC3261), SDP (RFC2327, RFC3264) as well as both TCP and UDP transport
• Supports User Agent Client (UAC) - User Agent Server (UAS) call, or proxy call routing
• Supports SIP and telephone URL addressing
• Supports in-band DTMF tone sending / receiving and out-band DTMF signaling with RTP, as per RFC2833
• Bonus services include:
  - Call Forwarding: Unconditional, No Response, On Busy
  - Call Waiting: Force Busy, Pickup and Release Old, Pickup and Put Old on Hold, Switch between two calls
  - Call Transfer, Call Back busy subscriber, Call Back last number called (call return)
  - Enquiry service
  - Three way conference
• Provisioning through TFTP client with configuration profile

• Configuration and Network Management
• SNMP GETs, SETs and TRAPs for four groups in MIB-II
• Embedded syslog; SNTP with DHCP options
• UPnP Internet Gateway Device (IGD) compliance
• Management and configuration via Web / HTTP
• Firmware upgrade using HTTP or TFTP

Note: Not every listed feature will be included in the shipping product.

Specifications are subject to change without previous notice.